This range of paint give a unique brilliance to surfaces and various objects. Perfect for DIY projects and workshop uses. It dries quickly and acts deeply as it dries fastly. A metallic enamel that has a particular brightness that looks similar to a mirror. Fields of Application: It is a multipurpose paint designed for indoor and outdoor use. It is adhesive and can be used on any material that is not non-stick (Polyethylene, etc..) Brio-Sol Leafing is designed for indoor/outdoor use to brighten different surfaces and objects such as frames, furniture, iron, vases, mask, cups, medals, Christmas ornaments, etc. It does not provide protection from abrasions. Once applied handle with care. Instructions for Use: Use gloves and mask before application. Avoid contact with skin and eyes. Apply in well-ventilated areas. Do not breathe its vapour. Shake the can by hearing the mixing ball loudly for 1 minute. It is also suggested to occasionally shake the cylinder even during use. Carefully clean the surface before application. Test in a hidden area to verify compatibility of the surface with the paint. Remove the security seal on the cap, to open the spray. Apply a first hand/coat light to improve coverage and adherence, to reduce the possibility of dropping. Apply from a distance of 20-30 cm. After a few moments apply a second horizontal hand/coat immediately followed by a third vertical hand/coat. Let dry for a few minutes. After use, it’s advisable to spray for 2/3 seconds with the spray upside down, to avoid the block of the actuator; It is dry to the touch approximately 30 minutes after use and it's completely dry approximately 1 hours after application. After 24h proceed with the normal use of painted piece. Store the product in a cool and dry place. Keep out of freezing, direct sunlight and temperatures above 50°C. Keep out of reach of children.