Gloss Black Spray Paint 400 Ml
Before painting your plastic or metallic surfaces, you should always prime and prepare the surface for long-lasting appearance and better adhesion of your paint. This paint is designed to be used as the base coat for a project. These sprays leave a transparent coat, it protects from rust and covers scratches. Fields of Application: It provides a strong base to ensure the perfect adhesion of the enamel spray on difficult surfaces such as plastics and metals. It protects metal surfaces from rust. On cars it covers small imperfections and scratches. Instructions for Use: Use gloves and mask before application. Avoid contact with skin and eyes. Apply in well-ventilated areas. Do not breathe its vapour. Shake the can by hearing the mixing ball loudly for 1 minute. It is also suggested to occasionally shake the cylinder even during use. Carefully clean the surface before application. Test in a hidden area to verify compatibility of the surface with the paint. Remove the security seal on the cap, to open the spray. Apply a first hand/coat light to improve coverage and adherence, to reduce the possibility of dropping. Apply from a distance of 20 cm. After a few moments apply a second horizontal hand/coat immediately followed by a third vertical hand/coat. Let dry for a few minutes. After use, it’s advisable to spray for 2/3 seconds with the spray upside down, to avoid the block of the actuator; It is dry to the touch approximately 15 minutes after use and it's completely dry approximately 22 hours after application. At least 24/48 hours required for over-coating. Store the product in a cool and dry place. Keep out of freezing, direct sunlight and temperatures above 50°C. Keep out of reach of children.